Configuring the Cisco Aironet 340

Disabling WEP
Currently, all iPass Wireless Broadband Access Points require that WEP (Wired Equivalent Privacy) be disabled.

To disable WEP for the Cisco Aironet 340:

1. Make sure the Aironet 340 card is inserted in your laptop and is active.
2. Open the Cisco Aironet Client Utility Version 5. (On most systems, it can be found at C:Program FilesCisco AironetAironet Client Utilitywindgs.exe.)
3. Click Profile Manager.
4. Under Select Active Profile, select your current profile and click Edit.
5. Select the Network Security tab.
6. Under WEP, select No WEP.
7. Click OK.

Identifying SSID
A few iPass wireless access points require that a specific SSID (Service Set Identifier) be identified in the 802.11b card software. If an SSID is required, the iPassConnect client will inform you of the new SSID.

To identify an SSID for the Cisco Aironet 340:

1. Make sure the Aironet 340 card is inserted in your laptop and is active
2. Open the Cisco Aironet Client Utility Version 5. (On most systems, it can be found at C:Program FilesCisco AironetAironet Client Utilitywindgs.exe.)
3. Click "Profile Manager"
4. Under Select Active Profile, select your current profile and click "Edit"
5. On the System Parameters tab, in the SSID1 text box, enter the appropriate SSID as directed by iPassConnect.
6. Click "OK"